GA-20 Solvent Based Acrylic Sealer for Concrete

GA-20 is a single-component, solvent-based acrylic concrete sealer formulated with 20% solids for superior surface protection and enhancement. It delivers a durable, breathable film that resists water intrusion while allowing moisture vapor to escape — perfect for a wide range of outdoor concrete applications. GA-20 enhances the color of concrete with a rich, wet-look finish while offering outstanding gloss and fast drying times. Whether you're sealing stamped concrete, overlays, broom-finished concrete, or masonry, GA-20 provides long-lasting beauty and protection. With a coverage rate of 250–530 square feet per gallon, it’s ideal for both residential and commercial exterior surfaces. Cure Schedule (70°F) Condition: Time Tack Free (Dry to Touch) Less than 1 hour Recoat 1–3 hours Light Foot Traffic 3–5 hours Full Cure (Heavy Traffic) 2–3 days How to Apply GA-20 Surface Preparation: Ensure surface is clean, dry, and free of dust, oil, grease, and existing sealers. Allow new concrete to cure for at least 30 days. Substrate must be at least 5°F above the dew point. Testing: Always apply a test area to confirm compatibility and appearance. Mixing: Stir GA-20 thoroughly before use. Do not thin. Application: Apply using a high-quality roller (3/8" nap) or solvent based sealer sprayer. Avoid pooling. Apply in two light coats rather than one heavy coat. Drying & Recoat: Allow the first coat to dry according to the cure schedule above. A second coat can be applied once the surface is tack-free and shows no solvent retention. Cleanup: Clean tools with xylene or xylol immediately after use.

• 【Coverage】250–530 sq. ft. per gallon;
• 【Solvent-Based】20% solids by weight acrylic formula;
• 【Single-component】— no mixing required;
• 【High-gloss color】— enhancing finish;
• 【Water-resistant】— seals out rain and surface moisture;
• 【Ideal for】Exterior concrete, overlays, stamped concrete, masonry surfaces.